[Octopus-devel] changes in libxc

Tue Mar 2 20:26:55 WET 2010

Hi Miguel,

I have libtool version 2.2.6, and also trouble. If it is of any help,
the initial problem (some complain about _LT_DECL causing a syntax
error that was reported also by Nicole,  I think) can be fixed adding
the "LT_INIT" macro to both configure.ac in the root and in the libxc
directories. Reading the documentation, it seems that it should be
added? Maybe this macro was non existing in libtool 1.x, or it was not
mandatory?

But then "configure" passes, and I get the error:

/bin/bash ../libtool  --tag=CC --tag=F77  --mode=compile gcc
-DHAVE_CONFIG_H -I. -I..     -g -O2 -MT libxc_la-lda.lo -MD -MP -MF
.deps/libxc_la-lda.Tpo -c -o libxc_la-lda.lo `test -f 'lda.c' || echo
'./'`lda.c
libtool: ignoring unknown tag F77
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT
libxc_la-lda.lo -MD -MP -MF .deps/libxc_la-lda.Tpo -c lda.c  -fPIC
-DPIC -o .libs/libxc_la-lda.o
In file included from util.h:74,
                 from lda.c:24:
xc.h:100:22: error: xc_funcs.h: No such file or directory
lda.c:25:23: error: funcs_lda.c: No such file or directory
make[4]: *** [libxc_la-lda.lo] Error 1

when doing make. It seems that the dependency of xc_funcs.h got
screwed up with the latest changes.

Cheers, Alberto.

2010/3/2 Roberto Olivares-Amaya <robolivares at gmail.com>:
> Hi Miguel:
> Thanks for the reply! The only machine where I have libtool version 1 seems
> to work fine, while that is not the case in the couple of others (as per
> ./configure output below)
>>
>> ./configure: line 2853: syntax error near unexpected token
>> `build_libtool_libs,'
>> ./configure: line 2853: `    _LT_DECL(build_libtool_libs, enable_shared,
>> 0,'
>
> I'll try to get a fresh install of libtool version 1 (while uninstalling
> version 2, which I got from synaptic) to see if this fixes the problem.
>
> Thanks for the help.
>
> Roberto
>
>
> On Tue, Mar 2, 2010 at 9:13 AM, Miguel Marques <Miguel.Marques at tddft.org>
> wrote:
>>
>>  Hi Roberto,
>>
>>  For the moment most machines have libtool 1, not 2! I haven't tried
>> with 2, but it should work. However, there is a big problem when there
>> is version 1 and 2 installed at the same time in the same computer. Is
>> this your case?
>>
>> > libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac
>> > <http://configure.ac> and
>> > libtoolize: rerunning libtoolize, to keep the correct libtool macros
>> > in-tree.
>>
>> This is just a warning that does not cause problems... the real error
>> should come afterwards.
>>
>>  cheers,
>>  m.
>>
>>
>> >
>> > I'm not sure if this is helpful at all.
>> >
>> > Roberto
>> >
>> > On Tue, Mar 2, 2010 at 5:09 AM, Nicole Helbig <nehelbig at gmail.com
>> > <mailto:nehelbig at gmail.com>> wrote:
>> >
>> >     Hi everyone,
>> >
>> >     as Matthieu guessed correctly, there were no libtools installed on
>> > my
>> >     computer. I did as he suggested and got version 1.5.26, and now the
>> >     autoconfig -i goes through (it seems), configure works but the make
>> >     quits with
>> >
>> >     libtool: link: unable to infer tagged configuration
>> >     libtool: link: specify a tag with `--tag'
>> >     make[4]: *** [libxc.la <http://libxc.la>] Error 1
>> >     make[4]: Leaving directory
>> > `/home/helbig/Octopus_svn/trunk/libxc/src'
>> >     make[3]: *** [all-recursive] Error 1
>> >     make[3]: Leaving directory `/home/helbig/Octopus_svn/trunk/libxc'
>> >     make[2]: *** [all] Error 2
>> >     make[2]: Leaving directory `/home/helbig/Octopus_svn/trunk/libxc'
>> >     make[1]: *** [all-recursive] Error 1
>> >     make[1]: Leaving directory `/home/helbig/Octopus_svn/trunk'
>> >     make: *** [all] Error 2
>> >
>> >     Cheers,
>> >
>> >     Nicole
>> >     _______________________________________________
>> >     Octopus-devel mailing list
>> >     Octopus-devel at tddft.org <mailto:Octopus-devel at tddft.org>
>> >     http://www.tddft.org/mailman/listinfo/octopus-devel
>> >
>> >
>> >
>> >
>> > --
>> > Roberto Olivares-Amaya
>> > Aspuru-Guzik Group
>> > Dept. of Chemistry and Chemical Biology
>> > Harvard University
>> > http://aspuru.chem.harvard.edu
>> >
>> >
>> > ------------------------------------------------------------------------
>> >
>> > _______________________________________________
>> > Octopus-devel mailing list
>> > Octopus-devel at tddft.org
>> > http://www.tddft.org/mailman/listinfo/octopus-devel
>>
>>
>> --
>> Dr. Miguel A. L. Marques
>> marques at tddft.org
>>
>> Laboratoire de Physique de la Matière Condensée et Nanostructures
>> (LPMCN) - Université Lyon I
>> Bâtiment Brillouin, Domaine scientifique de la DOUA
>> 69622 Villeurbanne Cedex
>> Tel +33 (0)4 72448187
>> Fax +33 (0)4 72432648
>
>
>
> --
> Roberto Olivares-Amaya
> Aspuru-Guzik Group
> Dept. of Chemistry and Chemical Biology
> Harvard University
> http://aspuru.chem.harvard.edu
>
> _______________________________________________
> Octopus-devel mailing list
> Octopus-devel at tddft.org
> http://www.tddft.org/mailman/listinfo/octopus-devel
>
>

-- 
===============================
Dr. Alberto Castro

Instituto de Biocomputación y Física de Sistemas Complejos (BIFI),
Corona de Aragón 42,
50009 Zaragoza, España.

Temporarily at:

Departamento de Física Teórica, Facultad de Ciencias,
Universidad de Zaragoza,
Pedro Cerbuna 12,
50009 Zaragoza, España.

Tel:   +34 976761000 3332
Fax:  +34 976761264
skype: alberto_c_barrigon
email: acastro at bifi.es
===============================