[Octopus-devel] changes in libxc

Alberto Castro acastro at bifi.es
Tue Mar 2 23:01:56 WET 2010 

Hi,

You don't need to take it from anywhere, just add a call to it in
libxc/configure.ac.

I put it right after AC_CONFIG_HEADERS, but don't know if this is the place:

...
AM_INIT_AUTOMAKE

AC_CONFIG_HEADERS([config.h])

LT_INIT

# Installation prefix by default
AC_PREFIX_DEFAULT([/opt/etsf])
...

But beware that I don't really understand if full why this makes it
work, and I don't think it will work everywhere. Especially for
systems with libtool 1.x.

Cheers, Alberto.

2010/3/2 Roberto Olivares-Amaya <robolivares at gmail.com>:
> Alberto:
> Could you be more specific regarding LT_INIT? Where should we take this
> macro from?
> So far, I've removed AC_DISABLE_SHARED, and got the same error you did in
> the previous e-mail.
>
> Thanks for the help.
>
> Roberto
>
>
>
> On Tue, Mar 2, 2010 at 5:34 PM, Alberto Castro <acastro at bifi.es> wrote:
>>
>> Hi again,
>>
>> I rectify:
>>
>> Actually, when I re-checked a fresh tree, everything went fine as long
>> as (1) I added "LT_INIT" *only* in the configure.ac of the libxc
>> directory, and not in the main one, (2) I removed AC_DISABLE_SHARED
>> from the configure.ac of the main directory.
>>
>> Then I could go through all the steps. But it seems that LT_INIT is
>> only defined for libtool larger than 2.something.
>>
>> Cheers, Al.
>>
>> 2010/3/2 Alberto Castro <acastro at bifi.es>:
>> > Hi Miguel,
>> >
>> > I have libtool version 2.2.6, and also trouble. If it is of any help,
>> > the initial problem (some complain about _LT_DECL causing a syntax
>> > error that was reported also by Nicole,  I think) can be fixed adding
>> > the "LT_INIT" macro to both configure.ac in the root and in the libxc
>> > directories. Reading the documentation, it seems that it should be
>> > added? Maybe this macro was non existing in libtool 1.x, or it was not
>> > mandatory?
>> >
>> > But then "configure" passes, and I get the error:
>> >
>> > /bin/bash ../libtool  --tag=CC --tag=F77  --mode=compile gcc
>> > -DHAVE_CONFIG_H -I. -I..     -g -O2 -MT libxc_la-lda.lo -MD -MP -MF
>> > .deps/libxc_la-lda.Tpo -c -o libxc_la-lda.lo `test -f 'lda.c' || echo
>> > './'`lda.c
>> > libtool: ignoring unknown tag F77
>> > libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -MT
>> > libxc_la-lda.lo -MD -MP -MF .deps/libxc_la-lda.Tpo -c lda.c  -fPIC
>> > -DPIC -o .libs/libxc_la-lda.o
>> > In file included from util.h:74,
>> >                 from lda.c:24:
>> > xc.h:100:22: error: xc_funcs.h: No such file or directory
>> > lda.c:25:23: error: funcs_lda.c: No such file or directory
>> > make[4]: *** [libxc_la-lda.lo] Error 1
>> >
>> > when doing make. It seems that the dependency of xc_funcs.h got
>> > screwed up with the latest changes.
>> >
>> > Cheers, Alberto.
>> >
>> >
>> >
>> > 2010/3/2 Roberto Olivares-Amaya <robolivares at gmail.com>:
>> >> Hi Miguel:
>> >> Thanks for the reply! The only machine where I have libtool version 1
>> >> seems
>> >> to work fine, while that is not the case in the couple of others (as
>> >> per
>> >> ./configure output below)
>> >>>
>> >>> ./configure: line 2853: syntax error near unexpected token
>> >>> `build_libtool_libs,'
>> >>> ./configure: line 2853: `    _LT_DECL(build_libtool_libs,
>> >>> enable_shared,
>> >>> 0,'
>> >>
>> >> I'll try to get a fresh install of libtool version 1 (while
>> >> uninstalling
>> >> version 2, which I got from synaptic) to see if this fixes the problem.
>> >>
>> >> Thanks for the help.
>> >>
>> >> Roberto
>> >>
>> >>
>> >> On Tue, Mar 2, 2010 at 9:13 AM, Miguel Marques
>> >> <Miguel.Marques at tddft.org>
>> >> wrote:
>> >>>
>> >>>  Hi Roberto,
>> >>>
>> >>>  For the moment most machines have libtool 1, not 2! I haven't tried
>> >>> with 2, but it should work. However, there is a big problem when there
>> >>> is version 1 and 2 installed at the same time in the same computer. Is
>> >>> this your case?
>> >>>
>> >>> > libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to
>> >>> > configure.ac
>> >>> > <http://configure.ac> and
>> >>> > libtoolize: rerunning libtoolize, to keep the correct libtool macros
>> >>> > in-tree.
>> >>>
>> >>> This is just a warning that does not cause problems... the real error
>> >>> should come afterwards.
>> >>>
>> >>>  cheers,
>> >>>  m.
>> >>>
>> >>>
>> >>> >
>> >>> > I'm not sure if this is helpful at all.
>> >>> >
>> >>> > Roberto
>> >>> >
>> >>> > On Tue, Mar 2, 2010 at 5:09 AM, Nicole Helbig <nehelbig at gmail.com
>> >>> > <mailto:nehelbig at gmail.com>> wrote:
>> >>> >
>> >>> >     Hi everyone,
>> >>> >
>> >>> >     as Matthieu guessed correctly, there were no libtools installed
>> >>> > on
>> >>> > my
>> >>> >     computer. I did as he suggested and got version 1.5.26, and now
>> >>> > the
>> >>> >     autoconfig -i goes through (it seems), configure works but the
>> >>> > make
>> >>> >     quits with
>> >>> >
>> >>> >     libtool: link: unable to infer tagged configuration
>> >>> >     libtool: link: specify a tag with `--tag'
>> >>> >     make[4]: *** [libxc.la <http://libxc.la>] Error 1
>> >>> >     make[4]: Leaving directory
>> >>> > `/home/helbig/Octopus_svn/trunk/libxc/src'
>> >>> >     make[3]: *** [all-recursive] Error 1
>> >>> >     make[3]: Leaving directory
>> >>> > `/home/helbig/Octopus_svn/trunk/libxc'
>> >>> >     make[2]: *** [all] Error 2
>> >>> >     make[2]: Leaving directory
>> >>> > `/home/helbig/Octopus_svn/trunk/libxc'
>> >>> >     make[1]: *** [all-recursive] Error 1
>> >>> >     make[1]: Leaving directory `/home/helbig/Octopus_svn/trunk'
>> >>> >     make: *** [all] Error 2
>> >>> >
>> >>> >     Cheers,
>> >>> >
>> >>> >     Nicole
>> >>> >     _______________________________________________
>> >>> >     Octopus-devel mailing list
>> >>> >     Octopus-devel at tddft.org <mailto:Octopus-devel at tddft.org>
>> >>> >     http://www.tddft.org/mailman/listinfo/octopus-devel
>> >>> >
>> >>> >
>> >>> >
>> >>> >
>> >>> > --
>> >>> > Roberto Olivares-Amaya
>> >>> > Aspuru-Guzik Group
>> >>> > Dept. of Chemistry and Chemical Biology
>> >>> > Harvard University
>> >>> > http://aspuru.chem.harvard.edu
>> >>> >
>> >>> >
>> >>> >
>> >>> > ------------------------------------------------------------------------
>> >>> >
>> >>> > _______________________________________________
>> >>> > Octopus-devel mailing list
>> >>> > Octopus-devel at tddft.org
>> >>> > http://www.tddft.org/mailman/listinfo/octopus-devel
>> >>>
>> >>>
>> >>> --
>> >>> Dr. Miguel A. L. Marques
>> >>> marques at tddft.org
>> >>>
>> >>> Laboratoire de Physique de la Matière Condensée et Nanostructures
>> >>> (LPMCN) - Université Lyon I
>> >>> Bâtiment Brillouin, Domaine scientifique de la DOUA
>> >>> 69622 Villeurbanne Cedex
>> >>> Tel +33 (0)4 72448187
>> >>> Fax +33 (0)4 72432648
>> >>
>> >>
>> >>
>> >> --
>> >> Roberto Olivares-Amaya
>> >> Aspuru-Guzik Group
>> >> Dept. of Chemistry and Chemical Biology
>> >> Harvard University
>> >> http://aspuru.chem.harvard.edu
>> >>
>> >> _______________________________________________
>> >> Octopus-devel mailing list
>> >> Octopus-devel at tddft.org
>> >> http://www.tddft.org/mailman/listinfo/octopus-devel
>> >>
>> >>
>> >
>> >
>> >
>> > --
>> > ===============================
>> > Dr. Alberto Castro
>> >
>> > Instituto de Biocomputación y Física de Sistemas Complejos (BIFI),
>> > Corona de Aragón 42,
>> > 50009 Zaragoza, España.
>> >
>> > Temporarily at:
>> >
>> > Departamento de Física Teórica, Facultad de Ciencias,
>> > Universidad de Zaragoza,
>> > Pedro Cerbuna 12,
>> > 50009 Zaragoza, España.
>> >
>> > Tel:   +34 976761000 3332
>> > Fax:  +34 976761264
>> > skype: alberto_c_barrigon
>> > email: acastro at bifi.es
>> > ===============================
>> >
>>
>>
>>
>> --
>> ===============================
>> Dr. Alberto Castro
>>
>> Instituto de Biocomputación y Física de Sistemas Complejos (BIFI),
>> Corona de Aragón 42,
>> 50009 Zaragoza, España.
>>
>> Temporarily at:
>>
>> Departamento de Física Teórica, Facultad de Ciencias,
>> Universidad de Zaragoza,
>> Pedro Cerbuna 12,
>> 50009 Zaragoza, España.
>>
>> Tel:   +34 976761000 3332
>> Fax:  +34 976761264
>> skype: alberto_c_barrigon
>> email: acastro at bifi.es
>> ===============================
>>
>> _______________________________________________
>> Octopus-devel mailing list
>> Octopus-devel at tddft.org
>> http://www.tddft.org/mailman/listinfo/octopus-devel
>
>
>
>



-- 
===============================
Dr. Alberto Castro

Instituto de Biocomputación y Física de Sistemas Complejos (BIFI),
Corona de Aragón 42,
50009 Zaragoza, España.

Temporarily at:

Departamento de Física Teórica, Facultad de Ciencias,
Universidad de Zaragoza,
Pedro Cerbuna 12,
50009 Zaragoza, España.

Tel:   +34 976761000 3332
Fax:  +34 976761264
skype: alberto_c_barrigon
email: acastro at bifi.es
===============================

More information about the Octopus-devel mailing list